TELEVISION - System Overview
This unit controls the television/video colour settings as well as telephone and navigation audio for the vehicles entertainment system.
SM068 - TELEVISION - System Help file
Version 1.27

TELEVISION - Known Fitments
Vehicle makes, models and variants known or believed to be using this vehicle system, required diagnostic lead and degree of known compatibility.

Vehicle Make Vehicle Model Vehicle Variant Diagnostic Lead
Land Rover Range Rover MK III (L322) 2002 - Mid 2005 Black OBDII Lead/LD020/LD021

TELEVISION - Physical Details

SM068 - TELEVISION - Diagnostic Capabilities (Read Fault Codes)
Reads the fault code memory. The ECU can self detect a number of different problems with itself, its wiring and its associated sensors, storing the respective code if it detects any malfunction or reading outside of pre defined acceptable limits. Not all stored faults may cause the fault warning lamp to illuminate.

SM068 - TELEVISION - Diagnostic Capabilities (Clear Fault Codes)
Clears the fault code memory.

SM068 - TELEVISION - Diagnostic Capabilities (Settings)
Values, configuration settings, and other stored information which can be read from the ECU. Read settings can also be stored as a standard HTML page for reference. These pages can then later be re loaded. Please note that all values are read only due to the fact that they are supplied from the ECU’s ROM or are internally calculated.

  • Part Number: This is the manufacturer's part number for the ECU.
  • Hardware Number: This is the hardware version which denotes the processor and circuit board type.
  • Software Number: This denotes the coding inside the processor for the hardware.
  • Supplier Number: A number which defines the supplier using a standard look up list of supplier ECU manufacturer numbers.
  • Coding Index: This the coding identification for the programming maps.
  • Diagnostic Index: This is a number that indicates the diagnostic capabilities support level.
  • Bus Index: This is a number that indicates the bus communication support level, the vehicle communication buses.
  • Week of Build: This is the week in which the unit was built.
  • Year of Build: This is the year in which the unit was built.

SM068 - TELEVISION - Diagnostic Capabilities (Inputs)
Realtime live display of the information the electronic control unit of the selected vehicle system is currently deriving from its input sensors.

  • Red output: This shows the status of the video red output self test. The status can be OK if the output is ok, HIGH if the output is open circuit, LOW if the output is short to ground and NO SYNC if there is no synchronization signal.
  • Green output: This shows the status of the video green output self test. The status can be OK if the output is ok, HIGH if the output is open circuit, LOW if the output is short to ground and NO SYNC if there is no synchronization signal.
  • Blue output: This shows the status of the video blue output self test. The status can be OK if the output is ok, HIGH if the output is open circuit, LOW if the output is short to ground and NO SYNC if there is no synchronization signal.
  • Red input: This shows the status of the video red input self test. The status can be OK if the output is ok, HIGH if the input is open circuit, LOW if the input is short to ground.
  • Green Input: This shows the status of the video green input self test. The status can be OK if the output is ok, HIGH if the input is open circuit, LOW if the input is short to ground.
  • Blue Input: This shows the status of the video blue input self test. The status can be OK if the output is ok, HIGH if the input is open circuit, LOW if the input is short to ground.
  • Telephone audio input: This shows the status of the telephone audio output self test. The status can be OK if the output is ok, HIGH if the input is open circuit, LOW if the input is short to ground.
  • Radio audio output: This shows the status of the radio audio output self test. The status can be OK if the output is ok, HIGH if the input is open circuit, LOW if the input is short to ground.
  • Navigation audio input: This shows the status of the navigation audio output self test. The status can be OK if the output is ok, HIGH if the input is open circuit, LOW if the input is short to ground.

SM068 - TELEVISION - Diagnostic Capabilities (Other)
Television self test: This initiate the television ECU self test routine. The test will take about 20 seconds. During the self test, the Multi Function Display will show a colour test pattern and then return to the normal picture.